On 9/2/2010 11:44 PM, Mike Spurgeon wrote:
> On 9/2/2010 1:31 PM, BLuRry wrote:
>> On Sep 2, 1:23 pm, schmidtd<schmi...@my-deja.com> wrote:
>>> On Sep 2, 1:48 pm, BLuRry<brendan.rob...@gmail.com> wrote:
>>>
>>>> Volt meter? :-) You can see the voltage reading bounce around on the
>>>> RX pin when there's data coming over. If anything, it's the best
>>>> thing to check that you're not going to blow a serial port elsewhere.
>>>
>>> One time, I had a guy tell me he just stuck his tongue against the
>>> pins to feel for it... I figure I'll use a slightly more sanitary
>>> method.
>>
>> Ah yes..< 12 volts -- but how many amps? ;-)
>
> I've played around with a phone company 1.5 volt wet cell. Really nice
> clear case, about 8x16x24, but it melted/burned most anything connected.
Lots of current available. ;-)
-michael
NadaNet 3.1 for Apple II parallel computing!
Home page:
http://home.comcast.net/~mjmahon/
"The wastebasket is our most important design
tool--and it's seriously underused."